Single Monitor Arm Desk Mount – Gas Spring Height Adjust, C-Clamp & Grommet, 13-32"
Local pickup only — we don't ship. A 20% Zelle deposit holds it for 5 business days and comes off the price at pickup.
About this one
- Category
- Monitor Arm Desk Mount
- In the building
- 100 units
The complaint that sinks most budget gas-spring monitor arms is simple: the spring loses tension and your screen slowly sags, parking only at the very top or bottom and never staying where you set it mid-height. Buyers of cheap arms report bolts that "won't tighten enough to hold the monitor up" and screens that drift the moment you let go. This arm is built to answer that exact failure.
🔒 Smooth one-hand height adjustment
The gas spring lifts up to 39.6 cm above the desk with smooth one-hand operation, so you can set your eye line across that range. Adjust once and fine-tune any time.
⚖️ Clearly rated load range
Built for monitors 13 to 32 inches weighing 4.4 to 19.8 lbs. Match your screen comfortably inside that range so the spring is working well within its rated load.
🔧 Everything in the box, no missing screws
Ships with both mounting options and the full hardware set: a C-clamp for renter-friendly, no-drill setup and a through-desktop grommet mount for maximum stability when you have a pre-drilled hole. Fits desktops 0.59 to 3.54 inches thick. Setup runs about 3 minutes.
🔁 Full-motion adjustment
Tilt -50 to +85 degrees, swivel ±90 degrees, and rotate a full 360 degrees. Every axis range is stated up front.
🖥️ Standard VESA fit
Compatible with VESA 75x75 mm and 100x100 mm mounting patterns, covering the vast majority of monitors so the plate lines up the first time.
🛠️ Alloy steel build
Made from alloy steel with automotive-grade components. The manufacturer states the arm was tested through 20,000 motion cycles.
📐 Specifications
| Monitor size | 13–32 inches |
| Weight range | 4.4–19.8 lbs |
| VESA patterns | 75x75 mm and 100x100 mm |
| Tilt | -50° to +85° |
| Swivel | ±90° |
| Rotation | 360° |
| Height lift | Up to 39.6 cm above desk |
| Mounting | C-clamp (no drilling) + grommet (through-desktop) |
| Desktop thickness | 0.59–3.54 inches |
| Operation | One-hand gas spring |
| Material | Alloy steel + automotive-grade components |
| Tested (manufacturer-stated) | 20,000 motion cycles |
| Setup | ~3 minutes, hardware included |
🇺🇸 Ships from our California warehouse for fast US delivery.
Why it's this price
We buy in volume and sell from a warehouse floor, not a mall. Open-box and overstock from brands you already know, each piece checked before it goes out. The savings are the point — and when it's gone, it's gone.